- Do not disassemble instrument cluster.
- When the replacement of a malfunctioning instrument cluster is necessary, follow exchange part procedures.
- Complete report form and return together with inst. cluster.
- Use the original packaging from the new cluster when returning modules.
- The instrument cluster must be coded according to market and equipment versions
See CODE CONTROL MODULE (FUNCTION 07)
.
- The odometer reading must be adapted to the new/exchange instrument cluster using the VAS 5051 tester
See VAS 5051 TESTER, CONNECTING
.
- Anti-theft immobilizer functions supported by the instrument cluster must be adapted to the Engine Control Module (ECM) using the VAS 5051 tester
See ADAPTATION AFTER REPLACING INSTRUMENT CLUSTER
.