Right instrument panel trim, removing and installing

Special tools, testers and auxiliary items required 

• Special hook 3370

• Torque wrench V.A.G 1783

Removing 

• Remove storage compartment on drivers side → Drivers side storage compartment (with and without knee bolster), removing and installing .
• Open glove compartment.

• Carefully remove trim - 1  - using hook for front end 3370.

• Pull off right instrument panel cover - arrow  - using special hook 3370.

• Remove bolts - 1  -.

Tightening torque: 3 Nm

• Remove bolts - 1  - (3x).

Tightening torque: 3 Nm

• Remove right trim.

Installing 

Installation is reverse of removal.