4-cyl. 5V engines 2.0L and 2.0L TFSI
- Switch ignition off.
- Remove engine cover (if present) → Engine cover: Removing
- Remove both bolts - 1 -.
- Push connector - 2 - toward ignition coil, press on catch with hand and remove connector.
- Remove ignition coil from spark plug using Ignition Coil Puller T40039.
- Remove spark plugs using spark plug wrench T40039.
- Install new spark plugs.
| Tightening torque | Nm |
|---|---|
| Spark plugs in cylinder head | 30 |
NOTE:
- Push ignition coils by hand into intended resources in cylinder head cover.