Light Switch E1 , removing and installing
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Push in light switch rotary knob - arrow 1 - and simultaneously turn clockwise - arrow 2 -.
- Hold switch in this position.
- Pull light switch out of switch housing - arrow 3 -.
- Disconnect electrical connection.
Installing
Install in reverse order of removal, noting the following:
- Press switch into switch housing until catch engages.