Pulling outer race for right tapered roller bearing out of transmission housing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pulling Outer For Right Tapered Roller Bearing Out Of Transmission Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Support , e.g. Kukko 22/2

B - Internal puller 56 to 70 mm , e.g. Kukko 21/8

After removing, check shims for damage.