Driving outer race for needle roller bearing out of bearing housing

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driving Outer Race For Needle Roller Bearing Out Of Bearing Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Clamp bearing housing in vise, using jaw protectors - C -.
Drive out outer race - A - using drift - B - by alternately applying drift to the bearing housing recesses located opposite each other - arrow -.