Heat the ring gear to approx. 100 ° C and install
WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLKSWAGEN UNITED STATES, INC.
- When installing ring gear guide it on centering pins -A- (locally made).
WARNING:
Wear protective gloves!
- Allow the ring gear to cool off slightly before inserting the bolts. Then tighten to the specified torque.