LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2002 >> S4 Quattro, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (4.2L - Engine Mechanical, Engine Code(S): BNS) >> 17 - Engine - Lubrication >> Lubrication system components, removing and installing >> Lubrication system components, removing and installing

Lubrication system components, removing and installing

WARNING: This page is about a different car, the 2008 Audi RS 4 and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If large quantities of metal shavings or abraded material are found in the engine oil while servicing the engine, the oil passages, lines and hoses must be carefully cleaned to prevent resulting damage and both oil coolers must be replaced.
  • Oil level must not exceed max. marking danger of catalytic converter damage!
  • Oil quantities, viscosity classes and oil specifications Maintenance tables.
scientia non olet · About LEMON Manuals