Charge Air Pressure Sensor G31 , removing and installing
WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
- Disconnect electrical harness connector - 2 - at Charge Air Pressure Sensor G31.
- Remove bolts and pull out Charge Air Pressure Sensor G31 from charge air cooler.
NOTE:
- Ignore - 1 -.
Installing
Installation is in reverse order of removal, note the following:
NOTE:
- Replace O-ring.
Torque specifications
| Component | Nm |
|---|---|
| Charge Air Pressure Sensor G31 to charge air cooler | 5 |