Lower B-pillar trim, removing and installing

Fig 1: Lower B-Pillar Trim Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - B pillar trim

NOTE:

For removing the lower B-pillar trim, the outer seatbelt anchoring point must not be removed.

Unclip lower A-pillar trim at rear end → Lower A-pillar trim, removing and installing .
Remove upper B-pillar trim → Upper B-pillar trim, removing and installing .
Unclip lower clip - 2 - at rear end of B-pillar trim - 1 -.
Pull lower B-pillar trim - 1 - upward until B-pillar trim disengages from belt guide - 4 -.

NOTE:

Guide pin - 5 - into hole on shell construction sill.
Attach upper trim - 1 - to belt guide - 4 -.
Secure lower rear trim - 1 - with clip - 2 -.
Clip lower A-pillar trim again at rear → Lower A-pillar trim, removing and installing .

After assembling trim, make sure seal is properly fitted.

2 - Clip

3 - Belt webbing

4 - Belt guide

5 - Pins