Electrical sun shade on rear window, removing and installing

Fig 1: Electrical Sun Shade On Rear Window Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Rear shelf

2 - Electrical sun shade

• Removing: 

• Remove rear shelf → Rear shelf, removing and installing .
• Pull out sun shade approx. 50 mm at covers with wheel - 6  -.
• Clamp something between sun shade and rear shelf.
• Loosen bolts - 5  - (2x).

• Remove cover with wheel - 6  - in direction of arrow.
• Remove nut - 4  - (8x).
• Remove sun shade - 2  -.

• Installing: 

Installation is reverse of removal.

3 - Connector

4 - Nut (8x)

5 - Screws, (2x)

6 - Cover with wheel