Left instrument panel trim, removing and installing
Special tools, testers and auxiliary items required
- Special hook 3370
- Torque wrench V.A.G 1783
Removing
- Remove storage compartment on drivers side → Drivers side storage compartment (with and without knee bolster), removing and installing .
- Pull off left instrument panel cover - arrow - using special hook 3370.
- Press light switch - arrow 1 - and turn toward right simultaneously - arrow 2 -.
- Hold switch in this position and remove light switch from switch housing - 3 -.
- Disconnect electrical connector.
- Press headlamp range control adjuster out of switch housing.
- Disconnect electrical connector.
- Remove bolts - 1 - (3x).
Tightening torque: 3 Nm.
- Remove the trim.
Installing
Installation is reverse of removal.