Headrest with slide in locking mechanism, removing and installing

Fig 1: Pushing Release Button In And Pulling Headrest Upward As Far As Possible

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

• Push release button - 2  - in - direction of arrow A  - and pull headrest - 1  - upward as far as possible - arrow B  -, keep release button pushed while doing so.

Fig 2: Pressing Release Button On Headrest Until Stop

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Press release button - 2  - on headrest - 1  - until stop - arrow  -.
• Slide headrest down completely on rods, release button on headrest must be kept pressed while doing so.
• Remove headrest completely from headrest guides.

Installing 

Installation is reverse of removal.