Vehicle Electrical System Control Module -J519-, removing and installing
Removing
- Remove driver's storage compartment:
Refer to 68 - INTERIOR EQUIPMENT
- Remove nuts -arrows- and remove Vehicle Electrical System Control Module -J519- -1-.
- Unclip fuse carrier -1- to 3-.
- Disengage securing bracket at connector -4- and remove.
- Unplug connectors -5- and -6-.
Installing
Installation is the reverse of removal.
Tightening torque
| Component | Nm | |
| Vehicle electrical system control module to center tube for instrument panel | 2.4 | |