Fuse carrier for main fuse, removing and installing

Removing 

• Remove rubber seal for plenum chamber cover.

Fig 1: Identifying Plenum Chamber Cover & Removing Rubber Seal

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove plenum chamber cover -1- toward front -arrows-.

Fig 2: Identifying Cap, Nut At Electric Cable, And Nut For Carrier Fuse On Positive Post

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Fold cap -2- to the side and remove nut -3- at electric cable.
• Remove nut -1- for fuse carrier on positive post.

Installing 

Installation is the reverse of removal.

Tightening torques