Window regulator switch, removing and installing

Removing 

Fig 1: Pressing Back Retaining Tab Of Window Regulator Switch And Removing Switch Upward From Armrest

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Position a flat screwdriver at the armrest hole as depicted in the illustration.
• Press back retaining tab of window regulator switch -arrow- and remove switch upward from armrest.
• Disconnect connector.

Fig 2: Identifying Window Regulator Switch And Switch Mount

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Carefully release catches -arrows- using a small screwdriver.
• Remove window regulator switch -1- downward from switch mount -2-.

Installing 

Installation is reverse of removal, paying attention to the following:

• Press window regulator switch into switch mount until catches engage.