Wiper blade rest position, adjusting
- Let wiper motor run to rest position.
- Set wiper blades on front windshield and align as follows:
| Vehicle type | Dimension a mm |
Dimension b mm |
| Cabriolet | 24 + 5 | 35 + 5 |
NOTE:
The dimensions indicate the gap between the wiper blades to cowl grille of plenum chamber at lower edge of windshield.
- Tighten wiper arm securing nut to 21 Nm.
- Operate wiper cycle button.
- If necessary, realign wiper arms once again and tighten securing nuts.