Cover and upholstery for headrests with slide in locking mechanism, removing and installing

Removing 

• Remove headrest with insertion lock → Headrest with slide in locking mechanism, removing and installing .

Fig 1: Cover And Upholstery For Headrests With Slide In Locking Mechanism Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Using a screwdriver, pry out grip channels - 3  - (4x).
• Remove button - 2  -.
• Remove cover and upholstery - 1  -.

Fig 2: Removing/Installing Cushion Out Of Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove cushion - 2  - out of cover - 3  -.

Installing 

• Insert cushion - 2  - with proper fit in cover - 3  -.
• Insert headrest mount - 1  - in upholstery with cover.
• Press retaining strips firmly in guide channel (test by pulling).