Operation 2: Erase DTC memory

WARNING: This page is about a different car, the 2003 Audi S6 and 2002 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Ignition switched on

Indicated on display

Fig 1: VAG 1551 Scan Tool Display - Erase DTC Memory (1 Of 2)

Courtesy of AUDI OF AMERICA, INC.

Enter "05" for function "Erase DTC memory" and confirm entry with Q key.

NOTE: The readiness code is reset when the DTC memory is erased and must therefore be reproduced.

Indicated on display

Fig 2: VAG 1551 Scan Tool Display - Erase DTC Memory (2 Of 2)

Courtesy of AUDI OF AMERICA, INC.

Press -->key.