Steering Column Switch Module (SCSM), disassembling
WARNING: This page is about a different car, the 2004 Audi S4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following list refers to Fig 1.
- Return spring with slip ring
- Clipped in at switch for turn signals, high beam and low beam and flasher
WARNING: Return ring with slip ring must not be moved in removed condition. - Steering Angle Sensor -G85-
- Clipped on at return ring with slip ring
- Cylinder bolt
- Cruise control switch
- Cylinder bolt
- Switch for turn signals, high beam and low beam and flasher
- Retaining bracket
- Steering Column Electronic Systems Control Module -J527-
- Terminal assignment of Steering Column Electronic Systems Control Module -J527-. See TERMINAL ASSIGNMENT AT STEERING COLUMN ELECTRONIC SYSTEMS CONTROL MODULE -J527- (FRONT) .
- Clamping screw - 3 Nm
- Switch for windshield wiper and wiper-washer operation
- Cylinder bolt