Crossmember, removing from bumper cover and installing

WARNING: This page is about a different car, the 2004 Audi S4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Bumper removed.
Remove horn -4-.
Disconnect hose -5- for headlight washer system on both sides (press release buttons).
Unthread bolts -3- on right spray jet for headlight washer system - spray jet remains installed.
Remove bolts -1- (5x).
Pry off retaining clips -2- (3x).
Swing spray jet for headlight washer system to one side and remove crossmember from bumper cover.

Fig 1: Removing Crossmember From Bumper Cover

Courtesy of AUDI OF AMERICA, INC.