Fuel delivery unit, removing and installing: Installing

Installation is in reverse order of removal. Note the following:

NOTE:

Fig 1: Identifying Notch Aligns With Marking

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert fuel delivery unit into baffle housing in tank so that the notch - 1 - at fuel delivery unit aligns with marking - 2 - at baffle housing.

Fig 2: Guiding Fuel Pump Wrench 3307 Through Fuel Tank Opening And Placing It On Fuel Delivery Unit

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Guide fuel pump wrench 3307 through fuel tank opening and place it on fuel delivery unit.
Fasten fuel delivery unit with fuel pump wrench 3307 , thereby turning approx. 15 ° toward right until stop (bayonet connection).

Fig 3: Identifying Notch Aligns With Marking

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 4: Separating Electrical Connection On Inner Side Of Locking Flange

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 5: Identifying Tab On Locking Flange Lies Between Tabs On Fuel Tank

Courtesy of VOLKSWAGEN UNITED STATES, INC.

The tab - 2 - on locking flange must lie between tabs - 1 - and - 3 - on fuel tank.

NOTE:

Fig 6: Removing/Installing Locking Ring With Wrench T10202

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Tighten locking ring.
Connect battery. Observe safety precautions after connecting battery →
- 27 BATTERY, STARTER, GENERATOR, CRUISE CONTROL
- 27 BATTERY, STARTER, GENERATOR, CRUISE CONTROL for ELECTRICAL EQUIPMENT, CABRIOLET
.