Dirt tray, removing and installing

Fig 1: Dirt Tray Remove/Install Components

GW00020873

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Cargo tray (optional)

Removal:

Release cargo tray - 1 - from lock - 4 -.
Unclip two clips - 2 - between cargo tray - 1 - and rear panel sill - 3 -.
Remove cargo tray - 1 - upward.

Installing:

Installation is reverse of removal.

2 - Clips (Qty. 2)

3 - Rear panel sill

4 - Cargo tray retainer

Removal:

Remove bolt - 5 - on cargo tray handle - 6 -.
Remove securing clip - 7 - of handle.
Remove handle - 6 -.
Loosen two expanding nuts - 9 -.

Unclip four clips - 8 -.
Remove cargo tray lock - 4 -.

Installing:

Installation is reverse of removal.

5 - Screw

6 - Grip

7 - Handle securing clip

8 - Clips (Qty. 4)

9 - Expanding nuts (Qty. 2)