Seat bench cover and upholstery, removing and installing

Fig 1: Seat Bench Cover And Upholstery Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Cover

• Removal:

• Remove rear seat bench: Vehicles through 10.04 → Seatbench, removing and installing - vehicles up to 10.04 , vehicles from 11.04 → Seatbench, removing and installing - vehicles from 11.04 .
• Pry out plastic strips - 3  - using a screwdriver.
• Turn back cover - 1  -.
• Remove cover - 1  - upward and press in plastic clips - 4  - (24x) using a screwdriver.

• Pry out plastic strips - 5  -.

• Installing: 

Installation is reverse of removal. Observe the following when doing so:

• Replaced damaged plastic clips.

2 - Upholstery

3 - Plastic strips (Qty. 24)

4 - Plastic clips (Qty. 24)

• Replace damaged plastic clips.

5 - Plastic strips