Headrest guides, vehicles through 10.04, removing and installing
Removing
- Push release button - 2 - in - direction of arrow A - and pull headrest - 1 - upward as far as possible - arrow B -, keep release button pushed while doing so.
- Press release button - 2 - on headrest - 1 - until stop - arrow -.
- Slide headrest down completely on rods, release button on headrest must be kept pressed while doing so.
- Remove headrest completely from headrest guides.
For clarity, headrest guide - 1 - is shown removed.
- Insert an upholstery needle or screwdriver - 3 - (max. width 2 mm) into hole - 4 - (hole - 4 - is located across from retaining clip for headrest guide).
- Pry screwdriver - 3 - in direction of arrow - A - and press catch - 2 - in direction of arrow - B -, pull out headrest guide - 1 - while doing so.
Installing
Installation is reverse of removal.