Headlight washer system spray jets, removing and installing

Removing 

Fig 1: Pulling Up On Spray Jet Covers At Bumper And Carefully Disengaging Mounts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Pull spray jet covers upward at bumper and carefully disengage mounts -arrow-.
• Remove the respective headlight. Refer to Headlights, removing and installing:  or Headlights, removing and installing: .

Fig 2: Identifying Washer Fluid Hose, And Spray Jet Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove washer fluid hose -3- (press release button).
• Unscrew bolts -1- and -2- and remove spray jet.

Installing 

Installation is reverse of removal, paying attention to the following:

• Install headlight. Refer to Installing  or Installing .

Tightening torque