Parking aid sensors (front where applicable), removing and installing: Removing

Installation location: In bumper (arrows).

Fig 1: Location Of Parking Aid Sensors (Front, Where Applicable)

Courtesy of AUDI OF AMERICA, INC.

• Remove respective wheelhousing liner on outside to remove sensors.

  See WHEELHOUSING LINER, FRONT .

• Open hood to remove inner sensors.
• Disconnect electrical connection -1- at sensor.
• Press both catches to side (arrows) and press sensor through from outside toward inside.
Fig 2: Removing Front Parking Aid Sensor
Courtesy of AUDI OF AMERICA, INC.
• Remove parking aid sensor toward the inside.