The final control diagnosis function actuates the following components in the stated sequence:
WARNING: This page is about a different car, the 2003 Audi RS 6. However, it is still accessible from the selected car via links, so may be relevant.
- Evaporative Emissions (EVAP) canister purge regulator valve -N80- (fuel tank breather valve)
- Secondary air injection solenoid valve -N112 -
- Secondary air injection pump relay -J299-
- Wastegate bypass regulator valve
-N75-
- Valve -2- for camshaft adjustment -N208-
- Leak Detection Pump -V144-
- Recirculating valve for turbocharger -N249-
- Right Electro -Hydraulic engine mount solenoid valve -N145-
(on right in direction of travel)
- Left Electro-Hydraulic engine mount solenoid valve -N144-
(on left in direction of travel)
- Valve -1- for camshaft adjustment -N205-
- Vacuum pump for brake system
- Fuel pump 2 relay -J49-
Refer to Note in ACTUATION OF FUEL PUMP 2 RELAY -J49- .
- Coolant fan actuation 2
- Coolant fan actuation 1
- Injector, cyl. 1 -N30-
- Injector, cyl. 5 -N83-
- Injector, cyl. 4 -N33-
- Injector, cyl. 8 -N86-
- Injector, cyl. 6 -N84-
- Injector, cyl. 3 -N32-
- Injector, cyl. 7 -N85-
- Injector, cyl. 2 -N31-
Locations of control elements, see COMPONENT LOCATIONS