LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2001 >> allroad Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear, AWD >> Removal & Installation >> Wheel Bearing >> Removal & Installation (Steel - Wheel Bearing Housing Removed)

Removal & Installation (Steel - Wheel Bearing Housing Removed)

Remove wheel bearing housing. See WHEEL BEARING HOUSING  . Replace wheel bearing as shown in illustrations. See Fig 1 -Fig 3 .

NOTE: When installing wheel bearing, large inside diameter of wheel bearing faces out.
Fig 1: Removing & Installing Wheel Bearing (Steel)
G00075044Courtesy of AUDI OF AMERICA, INC.
Fig 2: Removing Inner Race From Wheel Hub
G00194681Courtesy of AUDI OF AMERICA, INC.
Fig 3: Removing & Installing Hub Assembly
G00075045Courtesy of AUDI OF AMERICA, INC.