Charge air cooler components, removing and installing
NOTE:
- Secure all hose connections using screw-type clamps appropriate for the model type:
See parts catalog.
- The bolt-locks on the screw clamps must be placed at the X -marking on the hose.
- Charge air system must be properly sealed.
The following list pertains to Fig 1.
- Air duct
- Rubber grommet
- Hose
- between charge air cooler and air guide in cowl
- Hose
- Between intake manifold and charge air cooler
- Bracket
- Riveted to body
- Rubber grommet
- With sleeve
- Charge air cooler
- Removing and installing, see CHARGE AIR COOLER, REMOVING AND INSTALLING