Read measuring value block: display group 6

NOTE: The display group numbers can be selected in sequence by pressing buttons -1- and -3- ((VAG 1551 scan tool) or buttons uparrow and downarrow ((VAG 1552 scan tool) or by pressing "uparrow "and" downarrow" on the screen of VAS 5051 vehicle diagnostic, testing and information system.

Fig 1: Read Measuring Value Block Chart (Display Group 6)

Courtesy of AUDI OF AMERICA, INC.

For function 11 login procedure, see PERFORMING LOGIN .
For electrical testing, see ELECTRICAL TESTING .

Press button -C- in order to enter the display group number manually.

Indicated on display

Fig 2: VAG 1551 Scan Tool Display - Enter Display Group Number XXX

Courtesy of AUDI OF AMERICA, INC.

Press buttons -1-, -2- and -5-.
Press -Q- button to confirm input.

NOTE: For Read measuring value block: display group 125:

On vehicles with control module No. 4B0 907 389, Display Group No. 125 is vacant, and cannot be selected either directly by entering a number, or by pressing buttons -1- and -3- on VAG 1551 scan tool or buttons uparrow and downarrow on VAG 1552 scan tool.
If you try to select Display Group No. 125, the display will show:

Indicated on display

Fig 3: VAG 1551 Scan Tool Display - Function Unknown Or Not Carried Out At Moment

Courtesy of AUDI OF AMERICA, INC.

Press --> button.

Indicated on display

Fig 4: VAG 1551 Scan Tool Display - Select Function XX

Courtesy of AUDI OF AMERICA, INC.