Diagnostic Trouble Code (DTC) Memory, erasing (function 05): Requirements
- DTC memory checked. See DIAGNOSTIC TROUBLE CODE (DTC) MEMORY, CHECKING (FUNCTION 02) .
- All malfunctions repaired.
After successful DTC memory check:
Indicated on display
Fig 1: VAG1551 Scan Tool Display - Diagnostic Trouble Code Memory, Erasing - Navigation System IV, From 2002 (1 Of 6)
- Press buttons -0- and -5- to select "Erase DTC memory", function 05.
Indicated on display
Fig 2: VAG1551 Scan Tool Display - Diagnostic Trouble Code Memory, Erasing - Navigation System IV, From 2002 (2 Of 6)
- Press -Q- button to confirm input.
Indicated on display
Fig 3: VAG1551 Scan Tool Display - Diagnostic Trouble Code Memory, Erasing - Navigation System IV, From 2002 (3 Of 6)
DTC memory is erased.
- Press --> button.
Indicated on display
Fig 4: VAG1551 Scan Tool Display - Diagnostic Trouble Code Memory, Erasing - Navigation System IV, From 2002 (4 Of 6)
NOTE:
Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.
- Test sequence is faulty if this message is displayed.
- Test sequence is faulty if this message is displayed.
Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.