Actuating fuel injectors
- Press --> button.
Indicated on display
- Press --> button.
After pressing arrow button, fuel injector must click five times.
Indicated on display
If the fuel injector does not click:
- Check fuel injectors. See FUEL INJECTORS, CHECKING .
- Press --> button.
Indicated on display
- Press --> button.
After pressing arrow button, fuel injector must click five times.
Indicated on display
If the fuel injector does not click:
- Check fuel injectors. See FUEL INJECTORS, CHECKING .
- Press --> button.
Indicated on display
- Press --> button.
After pressing arrow button, fuel injector must click five times.
Indicated on display
If the fuel injector does not click:
- Check fuel injectors. See FUEL INJECTORS, CHECKING .
- Press --> button.
Indicated on display
- Press --> button.
After pressing arrow button, fuel injector must click five times.
Indicated on display
If the fuel injector does not click:
- Check fuel injectors. See FUEL INJECTORS, CHECKING .
- Press --> button.
Indicated on display
- Press --> button.
After pressing arrow button, fuel injector must click five times.
Indicated on display
If the fuel injector does not click:
- Check fuel injectors. See FUEL INJECTORS, CHECKING .
- Press --> button.
Indicated on display
- Press --> button.
After pressing arrow button, fuel injector must click five times.
Indicated on display
If the fuel injector does not click:
- Check fuel injectors. See FUEL INJECTORS, CHECKING .
- Press --> button.
Indicated on display
- Press --> button.
After pressing arrow button, fuel injector must click five times.
Indicated on display
If the fuel injector does not click:
- Press --> button.
- Check fuel injectors. See FUEL INJECTORS, CHECKING .
Indicated on display
- Press --> button.
After pressing arrow button, fuel injector must click five times.
Indicated on display
If the fuel injector does not click:
- Check fuel injectors. See FUEL INJECTORS, CHECKING .
- Press --> button.
Indicated on display
- Press buttons -0- and -6- to select function "End Output" and confirm by pressing -Q- button.