Actuating injectors
- Press -->key.
Indicated on display
- Press -->key.
After key is pressed, injector must click five times.
Indicated on display
If the injector does not click:
- Test injectors. See INJECTORS, CHECKING .
- Press -->key.
Indicated on display
- Press key.
After key is pressed, injector must click five times.
Indicated on display
If the injector does not click:
- Test injectors. See INJECTORS, CHECKING .
- Press -->key.
Indicated on display
- Press --> key.
After --> key is pressed, injector must click five times.
Indicated on display
If the injector does not click:
- Test injectors. See INJECTORS, CHECKING .
- Press -->key.
Indicated on display
- Press key.
After --> key is pressed, injector must click five times.
Indicated on display
If the injector does not click:
- Test injectors. See INJECTORS, CHECKING .
- Press --> key.
Indicated on display
- Press --> key.
After --> key is pressed, injector must click five times.
Indicated on display
If the injector does not click:
- Test injectors. See INJECTORS, CHECKING .
- Press --> key.
Indicated on display
- Press --> key.
After --> key is pressed, injector must click five times.
Indicated on display
If the injector does not click:
- Test injectors. See INJECTORS, CHECKING .
- Press -->key.
Indicated on display
- Press --> key.
After --> key is pressed, injector must click five times.
Indicated on display
If the injector does not click:
- Test injectors. See INJECTORS, CHECKING .
- Press --> key.
Indicated on display
- Press --> key.
After --> key is pressed, injector must click five times.
Indicated on display
If the injector does not click:
- Test injectors. See INJECTORS, CHECKING .
- Press --> key.
Indicated on display
- Press --> key.
Display function selection
- Press keys 0 and 6 for "End output" function and press Q key to confirm entry.