LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2001 >> S4 Quattro, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Exhaust System - 4.2L V8 - Art, Awn, BBD) >> Exhaust system components >> Exhaust system, aligning to relieve stress >> Align exhaust system to avoid stress in the system and to prevent noise as follows:

Align exhaust system to avoid stress in the system and to prevent noise as follows:

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 Audi A6, 2003 Audi S6, 2003 Audi A6, 2002 Audi S6, and 2002 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Be sure muffler mountings are free of stress when installing.
  • When aligning and relieving stress, loosen all bolted connections (except exhaust manifold), including mountings for catalytic converter.
  • Align the exhaust system when cold.
  • Perform the work in the order described below.
  • Dimensions in the illustrations are approximate.
scientia non olet · About LEMON Manuals