LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2001 >> S4 Quattro, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Exhaust System - 4.2L V8 - Art, Awn, BBD) >> Exhaust system components >> Exhaust manifold, removing and installing >> Installing >> Notes

Exhaust manifold, removing and installing: Installing: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 Audi A6, 2003 Audi S6, 2003 Audi A6, 2002 Audi S6, and 2002 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • DO NOT re-use fasteners that are worn or deformed in normal use.
  • Some fasteners are designed to be used only once and are unreliable and may fail the second time. This includes, but is not limited to nuts, bolts, washers, circlips and cotter pins. Always follow the recommendations in this manual - replace these fasteners with new parts where indicated and any other time when deemed necessary by inspection.
NOTE:
  • Replace self-locking nuts.
  • Replace gaskets.
  • Install new sealing ring on guide tube for dipstick.
scientia non olet · About LEMON Manuals