Channel 62
NOTE:
This function is used to adapt all control modules using information data bus. To identify all control modules using information data bus, read measured value block display group 140. See FUNCTION MODE 08: READING MEASURED VALUE BLOCK
.
- When ADAPTATION INPUT CHANNEL NUMBER XX is displayed, press 6 and 2 keys (62), then press "Q" to confirm input. CHANNEL 62 ADAPTATION 0 <-1 3-> will be displayed (0 indicates nothing is entered). Press right arrow key.
- CHANNEL 62 ADAPTATION 0 INPUT ADAPTATION VALUE XXXXX will be displayed. Enter appropriate value. See INFORMATION DATA BUS CODES table. For example, enter 00005 for navigation and radio (navigation + radio = 4 + 1 = 5). Press "Q" to confirm input.
- CHANNEL 62 ADAPTATION 5 <-1 3-> will be displayed. Press "Q" to confirm input. CHANNEL 62 ADAPTATION 5 STORE CHANGED VALUE will be displayed. Press "Q" to confirm input. CHANNEL 62 ADAPTATION 5 CHANGED VALUE IS STORED will be displayed. Press right arrow key to complete adaptation of information data bus.
INFORMATION DATA BUS CODES
| Equipment | Code |
|---|---|
| Radio (Symphony) | 1 |
| Telephone | 2 |
| Navigation | 4 |
| Telematic | 8 |