Channel 61
NOTE:
This function is used to adapt all control modules using comfort system data bus. To identify all control modules using comfort system data bus, read measured value block display group 130. See FUNCTION MODE 08: READING MEASURED VALUE BLOCK
.
- When ADAPTATION INPUT CHANNEL NUMBER XX is displayed, press 6 and 1 keys (61), then press "Q" to confirm input. CHANNEL 61 ADAPTATION 0 <-1 3-> will be displayed (0 indicates nothing is entered). Press right arrow key.
- CHANNEL 61 ADAPTATION 0 INPUT ADAPTATION VALUE XXXXX will be displayed. Enter appropriate value. See COMFORT SYSTEM DATA BUS CODES table. For example, enter 00768 for tire pressure control (instrument cluster + tire pressure = 256 + 512 = 768). Press "Q" to confirm input.
- CHANNEL 61 ADAPTATION 768 <-1 3-> will be displayed. Press "Q" to confirm input. CHANNEL 61 ADAPTATION 768 STORE CHANGED VALUE will be displayed. Press "Q" to confirm input. CHANNEL 61 ADAPTATION 768 CHANGED VALUE IS STORED will be displayed. Press right arrow key to complete adaptation of comfort system data bus.
COMFORT SYSTEM DATA BUS CODES
| Equipment | Code |
|---|---|
| Instrument Cluster | 256 |
| Tire Pressure | 512 |
| Parking Assistance | 16384 |
| Auxiliary Heater | 32768 |