Channel 60
NOTE:
This function is used to adapt for all control modules using powertrain data bus. To identify all control modules using powertrain data bus, read measured value block display groups 125 and 126. See FUNCTION MODE 08: READING MEASURED VALUE BLOCK
.
- When ADAPTATION INPUT CHANNEL NUMBER XX is displayed, press 6 and 0 keys (60), then press "Q" to confirm input. CHANNEL 60 ADAPTATION 1035 <-1 3-> will be displayed (1035 indicates engine, automatic transmission, A/C and instrument cluster). Press right arrow key.
- CHANNEL 60 ADAPTATION 1035 INPUT ADAPTATION VALUE XXXXX will be displayed. Enter appropriate value. See POWERTRAIN DATA BUS CODES table. For example, enter 01033 for manual transmission (engine + A/C + instrument cluster = 1 + 8 + 1024 = 1033). Press "Q" to confirm input.
- CHANNEL 60 ADAPTATION 1033 <-1 3-> will be displayed. Press "Q" to confirm input. CHANNEL 60 ADAPTATION 1033 STORE CHANGED VALUE will be displayed. Press "Q" to confirm input. CHANNEL 60 ADAPTATION 1033 CHANGED VALUE IS STORED will be displayed. Press right arrow key to complete adaptation of powertrain data bus.
POWERTRAIN DATA BUS CODES
| Equipment | Code |
|---|---|
| Engine | 1 |
| Transmission | 2 |
| Brake | 4 |
| A/C | 8 |
| ADR | 32 |
| Instrument Cluster | 1024 |