LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2001 >> S4 Quattro, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Self-Diagnostic System >> Function Mode 10: Adaptation >> Channel 09

Channel 09

NOTE: This function is used to adapt odometer after instrument cluster is replaced. Changing odometer reading can only be done on an instrument cluster once. If incorrect value is entered and confirmed, instrument cluster must be replaced. Odometer cannot have more than 100 miles on it (new instrument cluster). Only adaptation values greater than 100 miles can be entered.
  1. When RAPID DATA TRANSFER SELECT FUNCTION XX is displayed, press 1 key twice (11). RAPID DATA TRANSFER 11-LOGIN-PROCEDURE will be displayed. Press "Q" key to confirm input. LOGIN-PROCEDURE INPUT CODE NUMBER XXXXX will be displayed. Enter code number 13861. LOGIN-PROCEDURE ENTER CODE NUMBER 13861 will be displayed. Press "Q" key to confirm input.
  2. RAPID DATA TRANSFER SELECT FUNCTION XX will be displayed. Press 1 and 0 keys. RAPID DATA TRANSFER 10 - ADAPTATION will be displayed. Press "Q" key to confirm input. ADAPTATION INPUT CHANNEL NUMBER XX will be displayed.
  3. Press 0 and 9 keys (09), then press "Q" key to confirm input. CHANNEL 9 ADAPTATION 0 MILEAGE IN 10 MILES <-1 3-> will be displayed. Press right arrow key.
  4. CHANNEL 9 ADAPTATION 0 INPUT ADAPTATION VALUE XXXXX will be displayed. Enter desired odometer reading to the nearest 10 miles. For example, if 89627 miles is desired, enter 08963 (first number represents 100,000 miles, second number represents 10,000 miles, third number represents 1,000 miles, fourth number represents 100 miles, and fifth number represents 10 miles). CHANNEL 9 ADAPTATION 0 ENTER ADAPTATION VALUE 08963 will be displayed.
    CAUTION: Ensure correct value has been entered before confirming it, because this value can NEVER be changed again.
  5. Press "Q" key to confirm input. CHANNEL 9 ADAPTATION 8963 MILEAGE IN 10 MILES <-1 3-> will be displayed. Press "Q" key to confirm input. CHANNEL 9 ADAPTATION 8963 STORE CHANGED VALUE will be displayed. Press "Q" to confirm input. CHANNEL 9 ADAPTATION 8963 CHANGED VALUE IS STORED will be displayed. Press right arrow key to complete service reminder adaptation.
scientia non olet · About LEMON Manuals