WARNING Display
When a condition that indicates a less urgent need for repairs occurs, a tone sounds once and the appropriate Yellow (priority 2) symbol is displayed. When more than one malfunction occurs, symbols will appear successively in 2 second intervals. Malfunctions are not stored in system memory. Priority 2 signals one of the following conditions exist:
- Brakelight is inoperative.
- Brake pads worn out (indicated by a circle within parenthesis).
- Charging system voltage is low or high.
- Dynamic headlight dimmer control is not functioning.
- Engine oil level is low.
- Engine oil sensor is defective.
- Fuel level is low.
- Headlight or taillight is inoperative.
- Speed warning (exceeding set speed warning limit).
- Windshield washer fluid level is low.
NOTE:
To adjust speed warning limit, see SETTING SPEED WARNING LIMIT
under PROGRAMMING.