Door handle and switch trim, removing
- Remove door trim → Front door trim, removing and installing .
- Remove insulation → Front door trim insulation, removing and installing .
- Remove screw - 2 -.
Fig 2: Pressing Retainer Hooks, Disconnecting Harness Connectors And Prying Out Window Lifter Switches Using Screwdriver
- Press retainer hooks - 4 - and disconnect harness connectors - 3 - (2x).
- Using screwdriver, pry out window lifter switches - 5 - (2x) at Item - 6 - (4x).
- Remove window lifter switches - 5 - (2x).
- Take out switch trim - 2 - with handle - 1 - in direction of arrow - A -.
- Pull out switch trim - 2 - then handle - 1 - in direction of arrow - B -.