Anchorage point for outer floor assembly

Fig 1: Anchorage Point Cover, Slip Tab And Press Tabs

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Open lid - 1  - by pulling in direction of - arrow  -.
• Remove cover - 1  - downward from floor assembly.
• When installing, slide tab - 3  - under floor covering.
• Press tab - 2  - under floor covering by closing lid.

Fig 2: Anchorage Point Cover Bolt And Plate

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolt - 2  -.
• Tightening torque 55 Nm
• Remove tab - 3  - from under floor covering.