Center anchorage points on floor panel

Fig 1: Center Anchorage Points On Floor Panel Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Seat belt buckle

• Remove rear seat bench → Rear seat bench, removing and installing .
• Remove screw - 2  -.

• Installing 

• When installing, make sure mounting - 3  - is positioned on retainer tab - 4  -.

2 - Screws (2x)

• Tightening torque 55 Nm

3 - Mounting

4 - Retainer tab

5 - Center support bracket