Head restraint cover and padding, removing and installing

Fig 1: Prying Fastening Strip Out Of Guide Slot Using Screwdriver

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove head restraint.

• Removing: 

• Use screwdriver to pry fastening strip - 2  - out of guide slot - 1  -.

Fig 2: Head Restraint Mount, Padding And Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove head restraint mount - 1  - from padding - 2  -.
• Remove padding - 2  - from cover - 3  -.

• Installing: 

• Insert padding - 2  - in cover - 3  - , making sure it is correctly aligned.
• Insert head restraint mount - 1  - in padding - 2  -.
• Press fastening strips firmly into guide slot (pull to check).