Drivers window lifter switch, removing and installing

• Remove door trim → Front door trim, removing and installing .
• Remove insulation → Front door trim insulation, removing and installing .

Fig 1: Pressing Retainer Hooks, Disconnecting Harness Connectors And Prying Out Window Lifter Switches Using Screwdriver

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Press retainer hooks - 4  - and disconnect harness connectors - 3  - (2x).
• Using a screwdriver, pry out window lifter switches - 5  - (2x) at Item - 6  - (4x).
• Remove window lifter switches - 5  - (2x).