Storage compartment and cover at rear side trim, removing
- Remove rear side trim → Rear side trim, removing and installing .
- Press upper locking lug at side trim and disengage storage compartment at bottom.
- Remove storage compartment.
- Using a flat-head screwdriver, pry out screw cover - 1 - (2x) at top and bottom - arrows -.
- Remove bolts - 1 - (2x).
- Open cover - 2 - completely and remove cover toward outside.
When installing, make sure that spring is sufficiently pre-tensioned.
- When installing, guide shaft - 3 - with "U" shaped edge - 4 - , into cover strap - 5 -.