Protective tube, installing on side airbag cable

Fig 1: Installing Protective Tube On Side Airbag Cable

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

• When installing a side airbag unit without protective tube - B  - , retrofit module with a protective tube.

• Slide protective tube - B  - onto side airbag cable at side airbag unit - 5  -. Marking - 1  - must be located at connector - 4  -.
• Unfold and secure protective tube - B  - using adhesive strips - A  -
• Remove white foil from chafe protection strip - C  - and adhere chafe protection strip between markings - 2  - and - 3  -.
• Remove yellow foil and wrap around protective tube.