Glove box lock, removing and installing

Fig 1: Glove Box Lock Tab And Opening Mechanism

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Apply screwdriver to tab - 2 - and turn carefully to pry out glove box opening mechanism - 1 -

NOTE:

Fig 2: Using Screwdriver To Pry Out Retaining Tabs And Pressing Lock Cylinder

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Use screwdriver to carefully pry out retaining tabs - 1 - (4x) in direction of - arrow - and at the same time press lock cylinder - 2 - in direction of - arrow -.

Fig 3: Glove Box Opening Mechanism, Mounts, Retainer Tabs, Spring And Pin

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Position glove box opening mechanism - 1 - such that mounts - 2 - clip into retainer tabs - 5 - (2x) and spring - 3 - engages in pin - 4 -.
Carefully press glove box opening mechanism - 1 - into glove box lid until both retainer tabs - 5 - engage.