Cooling system, draining and filling: Draining
NOTE:
- Catch drained-off coolant in a clean container for re-use or disposal.
- Coolant must only be mixed with clean drinking water.
- Remove cap from coolant expansion tank.
WARNING:
Hot steam can escape when the cap on the expansion tank is opened. Cover the cap with a cloth, and open it carefully.
- Remove center section of noise insulation.
- Place drip tray V.A.G 1306 below engine.
- Turn drain screw (arrow) on radiator counter-clockwise, install an extension hose to the connection if necessary.
- Disconnect coolant hose at bottom of oil cooler (arrow), and drain off remaining coolant.